ยี่ห้อ
 
หมวดสินค้า
 
50 สินค้าคนดูมากสุด
 
แท็กสินค้า
โมดูลาร์ อแด็ปเตอร์ 1:3 (6P4C) เครื่องมือเข้าสายโทรศัพท์ (ไต้หว คอนเน็คชั่น โมดูล 2/10 (โครเน่) โมดูลาร์ บ๊อก (ขนาดใหญ่) 6P4C โมดูลาร์ บ๊อก (ขนาดกลาง) 6P4C สายโทรศัพท์แบน 4 คอร์ (100 เมตร ลาเบล โฮลเดอร์ 2/10 สายครอสโทรศัพท์ (ขาว - แดง) ขนาด บ๊อกพักสายโทรศัพท์ขนาด 30 คู่สาย Test Plug 4 Poles (ไต้หวัน) ขาสแตนเลส 1 ขา (ความลึก 22 มม.) ดิสคอนเน็คชั่น โมดูล 2/10 (โครเน ดิสคอนเน็คชั่น โมดูล 2/10 (แบบโป เครื่องมือเข้าสายโทรศัพท์ โครเน่ Test Plug 2 Poles (โครเน่) โมดูลาร์ อแด๊ปเตอร์ ตัวเมีย 1:2 แม็กกาซีน สำหรับ อาร์เรสเตอร์ 3 โมดูลาร์ อแด็ปเตอร์ 1:2 (6P4C) ดีสคอนเนคเตอร์ อุปกรณ์เชื่อมต่อพักสายโทรศัพท์ Test Plug 4 Poles (โครเน่) คอนเน็คชั่น โมดูล 2/10 (แบบโปรไฟ Disconnection Module อาร์เรสเตอร์ 3 โพล (พร้อม Failed Test Plug 2 Poles (ไต้หวัน)
 
อัตราแลกเปลี่ยน
 
สถิติ

เริ่ม :25 กย. 2553
 
ตะกร้าสินค้า
0 รายการ
 
นาฬิกา
 
สินค้าของเรา
BAS Cable 1P 20 AWG w.Shield
BAS Cable 1P 20 AWG w.Shield
P/N9220
0.00 บาท
 
ไปรษณีย์ไทย
 
สินค้าน่าสนใจ
 
DBD Registered

 

Cable modem slave device

Cable modem slave device
กดเพื่อขยายขนาด
ราคา: 0.00 บาท
สถานะสินค้า: สั่งของก่อน
โมเดล: CL-CM02
ความนิยมเฉลี่ย: ยังไม่มีอัตราความนิยม

Product Name: Cable modem slave device
Product Model: CL-CM02
Description:
Name:  CL-CM01 Cable modem master device
              CL-CM02 Cable modem slave device (Cable Modem)
              Ethernet and TV over Cable
                
 
*Cable modem master device                    *Cable Modem
 
Overview:
This solution is based on the original HFC connectivity without affecting the present CATV operating. The solution adopts the latest Modulation technology to consolidate Ethernet and CATV signals to transmit and complete the triple play: voice, video and data over a single coaxial cable. The solution can use less reconstructing cost and smaller project job to change the original unidirectional CATV network into a bi-directional and multi –service broadband network platform. It is unnecessary to reconstruct the original CATV network. It possesses good adaptability and flexible connectivity and brings a brand-new concept for radio & TV system.
 
Feature:
1. Developed from the integrated circuit with our own property right.
2. Able to send and receive Ethernet and CATV signals over coaxial –cable without affecting sending and receiving of CATV signal
3. Data rate up to above 45M on the Master. The Master can connect 32 Nos of the Salves at most.
4. Multi slaves can share bandwidth of the Master. This means the bandwidth can be configured randomly.
5. The bridge can extend transmission distance of CATV signal. Can connect all kinds of CATV signal amplifier to realize bi-direction transmission.
 
Specification:
 
Power
AC Input
100~240V
DC Input
-48V
Power Consumption
≤3W
RF Channel frequency 230MHZ
Output Power
3055dB
Receive Sensitivity
50dBm
Connector   F type Female socket(metric system)
Output impedance
75Ω
Modulation mode APSK BPSK QPSK QAM auto-sensing
Data rate
200Mbps
Throughput rate
50Mbps
Ethernet Connector RJ-45
Standard    IEEE802.3,IEEE802.3af,10/100Base-T
Smart bit
60K~1522K
Operating Temp
40℃~+80
Size
Master: 191mm×263mm×76mm
Slave: 140mm×106mm×38mm
Power consumption
<10W
Relative Humidity
Less than 95%
Gas pressure
70kpa~106kpa
no causticity gasno dustno magnetic field disturb
In the field, there is no filter noise problems. when working at  40℃~+80, no hang
Environment
Operation Temperature
0~50O
Operation Relative Humidity
20~90%
Store Temperature
-20~65
Store Relative Humidity
10~95%
 
Application:

Diagram 1
 
  
Diagram 2 An amplifier is connected  in the connectivity diagram as follows:
 
 
 

 

 
เขียนความคิดเห็น
ชื่อ:


ความคิดเห็น: คำแนะนำ: HTML จะไม่ถูกแปลง!

ความนิยม: แย่            ดี

ป้อนรหัสในกล่องข้างล่างนี้:

ไม่มีรูปภาพเพิ่มเติมสำหรับสินค้านี้