V2806 4FE+2POTS SFU
กดเพื่อขยายขนาด |
|
V2806 4FE+2POTS SFU
Model : V2806
Dimensions : 160mm*32mm*115mm(W*H*D)
Description : 4FE+2POTS EPON ONU
Introduction
V2806 is an EPON broadband terminal device designed for fulfilling FTTH/FTTO request of telecom operators, and internet access of SOHO people. This product is basing on the stable and mature Gigabit EPON technology, which has high performance/price ratio, and the technology of Layer 2 Ethernet switch and the technology of high quality VoIP as well. It is highly reliable and easy to maintain, with guaranteed QoS. And it is fully compliant to technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment (V2.1) from China Telecom.
Special Features
► Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc.
► Integrated OAM remote configuration and maintenance function.
► Support rich QinQ VLAN functions and IGMP Snooping multicast features.
► Integrated line testing compliant with GR-909.
► Support EPON fiber transceiver,CATV Rx and RF output diagnostic monitoring, EPON fiber transmitter and RF receiver disable remotely, etc.
► Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
► For small and medium-sized operators, VoIP services are customizable.
Technical parameters
Technical items |
Description |
Upstream PON interface |
1 EPON interface, SC single-mode/single-fibre, symmetric 1.25Gbps |
Wavelength |
Tx 1310nm, Rx 1490nm |
Optical interface |
SC connector |
Downstream LAN interface |
4 10/100Mbps auto adaptive Ethernet interfaces, Full Duplex/Half Duplex, RJ45 connectors |
Downstream POTS interface |
2 FXS, RJ11 connectors |
Indicators |
8 indicators, for status of power supply, PON, LAN and POTS. |
DC power supply |
+12V, external AC-DC power adaptor |
Power switch |
1 |
Power consumption |
≤12W |
Operating condition |
Operating temp: -25~+55℃ |
Storing condition |
Storing temp: -30~+60℃ |
Dimension |
160mm*115mm*32mm(length*width*height) |
Net weight |
0.5Kg |
Data Service Functions
► Full speed non-blocking switching.
► 1K MAC address table.
► 64 full range VLAN ID.
► Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc.
► Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.
► Support auto polarity detection of Ethernet ports (AUTO MDIX).
► Integrated IEEE802.1p QoS with four level priority queues.
► Support IPv4 IGMP snooping and IPv6 MLD snooping.
POTS Service Functions
► Call protocol: SIP(IMS compatible)/H.248(Megaco)/MGCP optional, seamless compatible with all popular call agent.
► Integrate heartbeat function and support active/standby call agent.
► Voice coding: ITU-T G.711/G.723.1(5.3K/6.3Kbit/s)/G.729, auto-negotiate with call agent.
► Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length.
► Support high/low speed fax, bypass fax, and T38 fax.
► Support high speed MODEM(56Kbps) dial access.
► Support RFC2833 and redundant RFC2833, difference rings, MD5 authentication, call forward, call waiting, hot-line call, alarm clock, and all kinds of value-added voice service.
► Multi-party conferencing.
► Line testing according to GR-909.
► IP address assignment: dynamic PPPoE/DHCP Client and static IP.
► Support WEB, CLI,IVR.
► Integrated OAM, XML, DHCP option 66 & 67 for auto configuration and firmware upgrade.
► Call loss less than 0.01%.
CATV Service Functions
► RF frequency: 45~875MHz.
► Turn on/off RF output remotely.
► RF level can be showed on PC Web real time.
Application Chart
ความคิดเห็น: คำแนะนำ: HTML จะไม่ถูกแปลง!
ความนิยม: แย่ ดี
ป้อนรหัสในกล่องข้างล่างนี้: